Error code 0x80070035, also known as "The network path was not found," is a common network-related issue when users try to access shared files or resources on another computer connected to the same network. This error code indicates that the network path was not found and can be due to various reasons, such as incorrect network settings, disabled sharing options, or other technical problems.
Table of Contents
Error Code 0x80070035
The entire message accompanying the error code 0x80070035 reads:
"Windows cannot access \\computer
Check the spelling of the name. Otherwise, there might be a problem with your network.
To try to identify and resolve network problems, click Diagnose.
Error Code: 0x80070035
The Network path was not found."
Network Path Not Found
The "network path not found" error suggests that the operating system cannot access or locate the specified network path. This issue might prevent users from sharing or accessing files and folders between devices on the same network. In most cases, resolving the error involves adjusting network settings and configurations or enabling specific services and protocols.
Possible Causes
Several factors can cause the error code 0x80070035, including:
- Incorrect network settings, such as IPv6 configurations or incorrect DNS settings
- Disabled or improperly configured file and printer-sharing options
- Firewall or antivirus software blocking access to the network path
- Network discovery is turned off
- Problems with the network adapter driver
- Computer name being too long or containing invalid characters
Fixing the error code 0x80070035 requires going through different troubleshooting steps to identify the underlying cause and apply the appropriate solution. The following sections outline various methods for resolving the "network path not found" issue.
Method 1: Enable Network Discovery and File Sharing
Enabling network discovery and file sharing is one of the most straightforward methods for resolving error code 0x80070035. These options allow your computer to find and access other devices on the same network, essential for sharing files and folders. To enable network discovery and file sharing, follow the steps below.
1. Open Run: Press the Windows key + R to open the Run dialog box. This utility allows you to execute system commands and launch applications.
2. Type in control.exe Command: In the Run dialog box, type "control.exe" (without quotes) and press Enter. This command opens the Control Panel, where you can access and modify various system settings, including network options.
3. Turn on Network Discovery: Navigate to Network and Internet > Network and Sharing Center > Change Advanced Sharing Settings. Click to expand the settings in the active network profile section (usually Private or Public). Locate the "Network discovery" option and enable it by selecting "Turn on network discovery." Ensure a tick is in the "Turn on automatic setup of network connected devices" checkbox.
4. Turn on File and Printer Sharing: Locate the "File and printer sharing" option under the same network profile section. Select "Turn on file and printer sharing" to enable this feature. Click the "Save changes" button to apply your modifications. Lastly, restart your computer for the changes to take effect. After rebooting, try accessing the shared resources again and see if the error code 0x80070035 has disappeared.
Method 2: Enable SMB 1.0/CIFS File Sharing Support
Server Message Block (SMB) is a critical protocol for sharing files, printers, and other resources on a network. The error code 0x80070035 may occur if SMB 1.0/CIFS File Sharing Support is not active on your system. To enable this feature, follow the steps below.
- Open Run: Press the Windows key + R to open the Run dialog box, which allows you to launch applications and execute system commands.
- Type in appwiz.Cpl Command: In the Run dialog box, type "appwiz.cpl" (without quotes) and press Enter. This command opens the Programs and Features window, where you can turn Windows features on or off.
- Turn Windows Features On or Off: In the Programs and Features window, click "Turn Windows features on or off," located on the left side of the window. That will open a new window containing a list of optional Windows features that can be enabled or disabled.
- Enable SMB 1.0/CIFS File Sharing Support: In the Windows Features window, scroll down to locate "SMB 1.0/CIFS File Sharing Support". Check the box next to this option to enable it. After selecting the option, click the "OK" button to apply the changes.
- Restart PC: After enabling SMB 1.0/CIFS File Sharing Support, restart your computer for the changes to take effect. Once your system has rebooted, try accessing the shared resources on your network again and see if the error code 0x80070035 has been resolved.
Method 3: Enable NetBIOS over TCP/IP
NetBIOS over TCP/IP is another essential networking feature affecting computer file sharing. If this setting is not enabled, it may prevent network paths from being found, causing error code 0x80070035. To enable NetBIOS over TCP/IP, follow these steps:
- Open Run: Press the Windows key + R to open the Run dialog box. This tool allows you to execute system commands and launch applications.
- Type in nipa.Cpl Command: In the Run dialog box, type "ncpa.cpl" (without quotes) and press Enter. This command opens the Network Connections window, where you can view and modify the properties of your network adapters.
- Access Network Adapter Properties: Right-click on your active network adapter (Ethernet or Wi-Fi) and select Properties from the context menu. In the properties window, locate "Internet Protocol Version 4 (TCP/IPv" and double-click on it to open its properties.
- Enable NetBIOS over TCP/IP: In the Internet Protocol Version 4 (TCP/IP Properties window, click on the "Advanced" button. Navigate to the "WINS" tab, and under the NetBIOS settings, select "Enable NetBIOS over TCP/IP." Click "OK" to save the changes and close the properties windows.
After enabling NetBIOS over TCP/IP, try accessing the shared resources on your network again to see if the error code 0x80070035 has disappeared. Suppose you have exhausted all possible solutions and are still unable to resolve the 0x80070035 error. In that case, it may be helpful to seek assistance from a knowledgeable IT professional or contact Microsoft support for further guidance.
